From full brightness
down to a glow.
EUCHIPS has made drivers and dimmers for LED since 2005. At Rafport you get phase cut drivers for 24 V and 12 V strips, DALI drivers and constant current drivers for recessed lights.
Two questions,
one answer.
Voltage or current depends on the light. The way you dim it depends on the wiring. Choose both and we will show you which EUCHIPS drivers fit.
The driver holds 24 V and the strip draws whatever current it needs. The most common solution for kitchens, stairs and cabinets.
Connects to an ordinary wall dimmer at 230 V. Supports both leading edge (Triac) and trailing edge dimmers. The easiest option when switching to LED in an older installation.
Before the strip goes up.
- +20%
Choose a driver with headroom
Add up the watts on the strip and add about 20%. Four meters of a 14.4 W per m strip is 57.6 W, so an EUP75T at 75 W is plenty.
- 2×
Connect long strips at both ends
On a long 24 V strip the voltage drops and the far end gets dimmer. Feed power in at both ends or in the middle.
- LCP
Long models for tight spaces
The LCP drivers are long and slim and fit where space is tight, for example above kitchen cabinets or in a dropped ceiling.
EUCHIPS at Rafport.
24 V, 40 W
24 V, 24 W
12 V, 40 W
20 W, 350 to 700 mA
24 V, 75 W
24 V, 40 W
12 V, 75 W
30 W, 550 to 900 mAA bigger job
coming up?
Send us the drawing or the list: the meters, the watts per meter and how you want to dim it. We will pick the drivers and send you a quote.
- rafport@rafport.is
- Phone
- 580 1900
- Warehouse
- Audbrekka 9 to 11, Kopavogur