Good light on the job site.Tidy finish.
Work light on a reel that lights up a whole room, track spots and the small parts that go into every installation: panel glands, pipe clips and conduit sleeves. All from Glob-el, available at Rafport.
One reel lights
up a whole room.
Roll the strip out along the floor, the rafters or the scaffold and plug it in with the ETLED plug. It withstands dust and moisture and can be joined together up to 50 meters.
- 230 VMains voltage
- IP65Resists dust and moisture
- 4000 KNeutral white
- 900 lmPer meter
- 9 WPer meter
- Ra 80Color rendering
- Light output
- 22.500 lm
- Power
- 225 W
One 25 m reel. Calculated from 900 lm and 9 W per meter.
A spot for the track.
You choose the bulb.
ETLED Star is a track spot for a GU10 bulb, so you decide the brightness and color of the light with the bulb. Available for three phase and single phase tracks, in black or white.
All spotsThe small parts that
finish the job.
The conduit should run straight and secure all the way into the panel. Pipe clips, panel glands and conduit sleeves take care of that, in packs that last the whole job.
Panel glands
The Egant panel gland for a single conduit, and Combi glands that take four or five conduits in the same hole, 40 and 50 mm.
Panel glands
Pipe clips
With a screw from 10 up to 26 mm, or with a drive nail in bags of 100 or full buckets.
Pipe clips
Conduit sleeves
Openable sleeves that snap around the conduit and join together. 16 mm, 20 mm and 16 into 20 mm.
What goes into the job.
A big job
coming up?
Send us the list, whether it is one reel or pipe clips for a whole house, and we will send you a quote.
- rafport@rafport.is
- Phone
- 580 1900
- Store
- Audbrekka 9 to 11, Kopavogur