UniFi UPS 2U Pro
UniFi-managed 2.2kVA rackmount UPS with pure sine wave output, 9 individually controllable outlets with per-port power monitoring and remote power cycling, a hot-swappable 720Wh battery, and up to 22 minutes of runtime at half load 990W. Supports Graceful Shutdown for UNVR and UNAS, and NUT compatibility for third-party devices.
Requires:
• UniFi OS 5.1.25 or later
• UniFi Network 10.5.67 or later
• UniFi Mobile Android 10.39.3 or later
• UniFi Mobile iOS 10.36.1 or later
Note. For Graceful Shutdown functionality, UniFi OS version 4.4.3 or higher is required.
3D and videos
Technical features
Information from the manufacturer's ETIM data. Need more detail? Contact our technical advisors.
| Dimensions | 442.4 x 87.4 x 630 mm (17.4 x 3.4 x 24.8") |
|---|---|
| Weight | 32 kg (70.5 lb) |
| Enclosure Material | Galvanized steel |
| Form Factor | Rack mount (2U) |
| Weatherproofing | IP20 |
| Management | Ethernet |
| Networking Interface | (1) 100/10 MbE port for network connection (2) GbE ports for surge in/out |
| Power | (1) OVC II AC in: C20 socket (8) Battery backup/surge protection: C13 (1) Battery backup/surge protection: C19 (Outlets are individually resettable) |
| Capacity | 2200VA/1980W |
| Type | Line interactive |
| Input Voltage Range | 170–280V AC |
| Power Method | (1) TN system, 230V AC, 10.2A Max., 50/60 Hz |
| Nominal Input Voltage | 230V AC |
| Output Voltage | 230V AC |
| Nominal Output Voltage | 230V AC |
| Frequency Range | AC mode: 50/60 Hz ±5 Hz (Auto sensing) Battery mode: 50 Hz ±1 Hz |
| AC Voltage Regulation | ±1.5% (Battery mode) |
| Transfer Time | 6 ms typical; 10 ms max. (Battery mode) |
| Wave Form | Pure sine wave (Battery mode) |
| Battery Type | (1) Lead Acid 72V, 10Ah |
| Runtime | Full load: 9 min Half load: 22 min |
| Battery Charging Time | 8 hours recovery to 90% capacity |
| Overload at On-Line Mode | 103–120% 5 min go to fault 120–150% 10 sec go to fault 150% 1 sec go to fault |
| Overload at Battery Mode | 103–120% 1 min go to fault 120–150% 10 sec go to fault 150% 0.5 sec go to fault |
| Short Circuit Protection at On-Line Mode | Breaker, 250V AC, 16A |
| Emergency Power Off (EPO) | Yes |
| Display | 3.7” touchscreen |
| Buttons | (1) Power (1) Factory reset (1) Circuit breaker |
| LEDs: Status | Off: device not turned on Flashing white: initializing / factory default Steady white: waiting for adoption Steady blue: device adoption and working Flashing blue: battery mode Alternating white/blue: firmware upgrading Rapid flashing blue: locate Steady red: warning Flashing red: low battery |
| LEDs: Ethernet | Yes |
| Operating Altitude | 3,000 m (1.9 mi) |
| Operating Environment | Pollution Degree 2 |
| Ambient Storage Temperature | -15 to 50° C (5 to 122° F) |
| Ambient Operating Temperature | 0 to 40° C (32 to 104° F) |
| Ambient Operating Humidity | 0 to 95% noncondensing |
| Certifications | CE, IEC 62040-1 |
| Application Requirements: Mobile Apps | iOS™: Version 10.36.1 and later Android™: Version 10.39.3 and later |
| Application Requirements: UniFi Network | Version 10.5.67 and later |
No documents registered for this product.
Guides and documents
Datasheets, installation guides and other supplier documents.