UniFi UPS PoE Switch Mission Critical
A switch with an integrated 368Wh lithium-ion battery capable of providing uninterruptible PoE to 8 devices.
Shipping Note. This product will be delivered with UPS Standard shipping, and is subject to additional fees and handling procedures, which could delay arrival.
It can be shipped to: Belgium, the Netherlands, Luxembourg, France, Germany, Austria, Switzerland, Spain, Italy, Portugal, Hungary, and the Czech Republic.
- (4) GbE PoE+, (4) GbE PoE++ ports
- (1) GbE port
- (2) 230V AC outputs; 120W total PoE available
- Battery backup power system
- Internal battery 368Wh
- Shipping Note: This product will be delivered with UPS Standard shipping, and is subject to additional fees and handling procedures, which could delay arrival.
- It can be shipped to: Belgium, the Netherlands, Luxembourg, France, Germany, Austria, Switzerland, Spain, Italy, Portugal, Hungary, and the Czech Republic.
3D and videos
Technical
Technical features
Information from the manufacturer's ETIM data. Need more detail? Contact our technical advisors.
| Dimensions | 442 x 480 x 44 mm (17.4 x 18.9 x 1.7") |
|---|---|
| Port Layout: 1 GbE RJ45 | 9 (4 PoE+; 4 PoE++) (1G/100M/10M) |
| Max. PoE Output | Up to PoE++ |
| Total PoE Availability | 120W |
| Redundancy | Battery Power Backup |
| Layer 3 | Yes |
| Form Factor | Rack mount (1U) |
| Switching Capacity | 18 Gbps |
| Total Non-Blocking Throughput | 9 Gbps |
| Forwarding Rate | 13 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 8,000 |
| Packet Buffer Size | 0.5 MB |
| LACP Port Aggregation | Yes |
| STP & RSTP | Yes |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | Yes |
| IGMP Snooping | Yes |
| 802.1X Control | Yes |
| MAC-Based ACLs & Device Isolation | Yes |
| DHCP Snooping & Guarding | Yes |
| Egress Rate Limit | Yes |
| Flow Control | Yes |
| Storm Control | Yes |
| Multicast & Broadcast Rate Limiting | Yes |
| MAC Address Blocking | Yes |
| IP-Based ACLs & Network Isolation | Yes |
| MAC-Based Port Restriction | Yes |
| Port Isolation | Yes |
| Port Mirroring | Yes |
| Jumbo Frames | Yes |
| LLDP-MED | Yes |
| Voice VLAN | Yes |
| Loop Protection | Yes |
| Virtual Network Override | Yes |
| PoE Ports: PoE+ | 4 |
| PoE Ports: PoE++ | 4 |
| Max. PoE Wattage per Port by PSE: PoE+ | 32W |
| Max. PoE Wattage per Port by PSE: PoE++ | 60W |
| Max. Power Consumption | 50W (Excluding PoE Output) 240W (Including PoE Output and AC Output) |
| Power Method | Universal input, 100–240V AC, 50/60 Hz External battery input, 48V DC |
| Power Input Method | AC input DC input (Backup) |
| Power Supply | AC/DC, internal, 240W |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet AR |
| Heat Dissipation | 170.6 BTU/hr (Excluding PoE Output) |
| Weight | Without mount: 9 kg (19.9 lb) With mount: 9.2 kg (20.3 lb) |
| Enclosure Material | SGCC steel |
| Supported Rack Depth | 482.6 mm (19") four-post racks Posts depths ranging from 700 to 1,000 mm (27.6–39.4”) |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air/contact: ± 24kV |
| Ambient Operating Temperature | -5 to 40° C (23 to 104° F) |
| Ambient Operating Humidity | 5 to 95% noncondensing |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC |
| Application Requirements: UniFi Network | Version 6.2.26 and later |
No documents registered for this product.
Guides
Guides and documents
Datasheets, installation guides and other supplier documents.