UniFi Switch Enterprise 8 PoE (Vintage)
8-portowy switch warstwy 3 z wyjściem 2.5 GbE PoE+.
Uwaga. Te switche nie są kompatybilne z wymaganiami PoE++ nowych punktów dostępowych U7 i E7. Zalecamy stosowanie switchy Enterprise Campus w takich wdrożeniach.
- (8) portów 2.5 GbE PoE+
- (2) porty 10G SFP+
- 120W łącznej dostępnej mocy PoE
- Uwaga. Te switche nie są kompatybilne z wymaganiami PoE++ nowych punktów dostępowych U7 i E7. Zalecamy stosowanie switchy Enterprise Campus w takich wdrożeniach.
3D i filmy
Dane techniczne
Cechy techniczne
Informacje z danych ETIM producenta. Potrzebujesz więcej? Skontaktuj się z naszym doradztwem technicznym.
| Dimensions | 200 x 248 x 44 mm (7.9 x 9.8 x 1.7") |
|---|---|
| Port Layout: 2.5 GbE RJ45 | 8 (All PoE+) (2.5G/1G/100/10M) |
| Port Layout: 10G SFP+ | 2 (10G/1G) |
| Max. PoE Output | Up to PoE+ |
| Total PoE Availability | 120W |
| Layer 3 | Yes |
| Form Factor | Compact desktop (Do not physically stack) |
| Switching Capacity | 80 Gbps |
| Total Non-Blocking Throughput | 40 Gbps |
| Forwarding Rate | 60 Mpps |
| Supported VLANs | 1,000 |
| MAC Address Table Size | 16,000 |
| IPv4 Static Routes | 256 |
| Packet Buffer Size | 1.5 MB |
| Access Lists: IPv4 | 12 |
| Access Lists: MAC | 10 |
| DHCP Server (Local Networks) | Yes |
| Inter-VLAN Routing (Local Networks) | Yes |
| Static Routing (Local Networks) | Yes |
| LACP Port Aggregation | Yes |
| STP & RSTP | Yes |
| Advanced IGMP Configuration (Querier, Fast Leave, Router Port) | Yes |
| IGMP Snooping | Yes |
| 802.1X Control | Yes |
| MAC-Based ACLs & Device Isolation | Yes |
| DHCP Snooping & Guarding | Yes |
| Egress Rate Limit | Yes |
| Flow Control | Yes |
| Storm Control | Yes |
| Multicast & Broadcast Rate Limiting | Yes |
| MAC Address Blocking | Yes |
| IP-Based ACLs & Network Isolation | Yes |
| MAC-Based Port Restriction | Yes |
| Port Isolation | Yes |
| Port Mirroring | Yes |
| Jumbo Frames | Yes |
| LLDP-MED | Yes |
| Voice VLAN | Yes |
| Loop Protection | Yes |
| Virtual Network Override | Yes |
| PoE Ports: PoE+ | 8 |
| Max. PoE Wattage per Port by PSE: PoE+ | 32W |
| Max. Power Consumption | 30W (Excluding PoE Output) 150W (Including PoE Output) |
| Power Method | Universal input, 100–240V AC, 50/60 Hz |
| Power Input Method | AC input |
| Power Supply | AC/DC, internal, 150W |
| Supported Voltage Range | 100–240V AC |
| Management | Ethernet AR |
| Heat Dissipation | 102.4 BTU/hr (Excluding PoE Output) |
| Weight | 2.4 kg (5.3 lb) |
| Enclosure Material | Polycarbonate |
| Mount Material | Polycarbonate |
| Supported Rack Depth | 400~1200 mm (15.7-47.2") |
| LCM Display | 1.3" touchscreen |
| ESD Protection | Air: ± 16kV, contact: ± 12kV |
| Ambient Operating Temperature | -5 to 45° C (23 to 113° F) |
| Ambient Operating Humidity | 10 to 90% noncondensing |
| NDAA Compliant | Yes |
| Certifications | CE, FCC, IC, Anatel: 06645-23-08356 |
| Application Requirements: UniFi Network | Version 6.3.51 and later |
Brak dokumentów dla tego produktu.
Instrukcje
Instrukcje i dokumenty
Karty katalogowe, instrukcje montażu i inne dokumenty od dostawcy.